Arc Welding Welding 

Brief details about ‘Advanced Welding Process’

While welding with oxy-acetylene or arc welding the welder faces main difficulty of oxidation. To avoid oxidation fluxes are used but fluxes are also corrosive in nature that’s why these welding process (oxy-Acetylene and electric arc) can’t be used on A/C equipment. For A/C equipment advanced welding techniques are used. These techniques are TIG, MIG, EBW, etc. Gas Tungsten Arc Welding (GTAW) Gas tungsten arc welding uses the heat of an electric arc between a tungsten electrode and the base metal. A Separate welding filler rod is fed into the…

Read More
Lathe Machine 

Installation Instructions for Taper Attachment on Lathe Machine

As there are innumerable variations in the design and construction of the engine lathes in use today, it is evident that no one accessory can be made to fit them all. So it is with taper attachments. Consequently, only very general instructions can be given, and these may have to be modified somewhat to fit a particular situation. This particular taper attachment is designed primarily for use with a telescoping cross slide screw, but it can be used with the regular non-telescoping type screw, though not without considerable inconvenience. Determine…

Read More
Lathe Machine 

Definition and Classification of Taper Turning

In order to understand taper turning, first you have to understand the general meaning of TAPER. Meaning of Taper A gradual decrease in thickness or width of an elongated object Diminish or reduce in thickness towards one end धीरे धीरे कम हो जाना to become or cause to become narrower towards one end Now you have a general idea what taper is. So, you can better understand the Taper Turning now. Taper Turning When the diameter of a piece changes uniformly, from one end to the other, the job is said…

Read More
Welding Workshop 

Understanding the Diferences between Heat Treatment, Annealing, and Tempering!

Heat Treatment, Annealing, and Tempering are three well-known methods for giving treatment to metals. Depending on the treatment used, a material may become more or less brittle, harder or softer, or stronger or weaker. The method chosen depends on the desired characteristics of the material. If steel is being treated, for instance, the designer may desire an end material with a high tensile strength but a relatively low degree of brittleness. In order to achieve the desired levels, the designer may make use of several treatments, alter the temperature at…

Read More
Lathe Machine 

What is Off Setting the Tailstock?

The tailstock offset method is generally used to cut a taper when no taper attachment is available. This involves moving the tailstock centre out-of-line with the headstock centre. However, the amount that the tailstock may be offset is limited. This method will not permit steep tapers to be turned or standard tapers to be turned on the end of a long piece of work. Since the work will be essentially at an angle it will need to be machined between centres. Thus, a chuck or collet can not be used…

Read More
Lathe Machine 

What is Compound Rest?

The compound rest is generally used for turning or boring short steep tapers, but it can also be used for longer, gradual tapers, providing the length of the taper does not exceed the distance the compound rest will move upon its slide. This method can be used with a high degree of accuracy, but is somewhat limited due to the lack of an automatic feed and the length of the taper being restricted to the movement of the slide. The compound rest base is graduated in degrees and can be…

Read More
Lathe Machine 

Taper Turning Attachment

The taper attachment is used for turning and boring tapers. It is bolted to the back of the carriage saddle. In operation, it is connected to the cross-slide so that it moves the cross-slide laterally as the carriage moves longitudinally. This action causes the cutting tool to move at an angle to the axis of the workpiece to produce a taper. The angle of the desired taper is set on the guide bar of the attachment, and the guide bar support is clamped to the lathe bed. Since the cross-slide…

Read More
Lathe Machine 

Methods Of Taper Turning

In ordinary straight turning, the cutting tool moves along a line parallel to the axis of the work, causing the finished job to be the same diameter throughout. However, when cutting a taper, the tool moves at an angle to the axis of the work, producing a taper. Therefore, to turn a taper, the work must either be mounted in a lathe so that the axis upon which it turns is at an angle to the axis of the lathe, or cause the cutting tool to move at an angle…

Read More
Engineering 

What is the function of waterstops in joints of box culverts and drainage channels?

The principal function of waterstops is to prevent liquids (e.g. water), water-borne materials and solids to pass through concrete joints. In essence, it aims at providing watertightness to the drainage channel. Besides, waterstops in drainage channels or box culverts can also serve two other purposes: to avoid water contacting joints’ dowel bars and causing corrosion. (ii) to avoid water seeping in from the underside of drainage channels or box culverts, thereby washing in soil particles and causing voids underneath these structures and finally leading to their failure. To serve the…

Read More
Engineering 

What is the difference between epoxy grout, cement grout and cement mortar?

Epoxy grout consists of epoxy resin, epoxy hardener and sand/aggregates. In fact, there are various types of resin used in construction industry like epoxy, polyester, polyurethane etc. Though epoxy grout appears to imply the presence of cement material by its name, it does not contain any cement at all. On the other hand, epoxy hardener serves to initiate the hardening process of epoxy grout. It is commonly used for repairing hairline cracks and cavities in concrete structures and can be adopted as primer or bonding agent. Cement grout is formed…

Read More