The alignment of the centre is to be checked (whether it is parallel to the movement of the ram) and adjusted before starting the work. The moving tool should not come and dash against the head stock. For long work pieces, proper support should be...
Continue reading »
November 24, 2014 admin
Shaping Machine
No Comment
Researchers have invested decades evaluating what is creating an Earth-wide temperature boost. They’ve taken a gander at the characteristic cycles and occasions that are known to impact atmosphere. Be that as it may the sum and example of warming that is been measured can’t be...
Continue reading »
November 22, 2014 admin
Global Warming
1 Comment
There are many ways in which work may be held while it is being machined on the shaping machine. The common methods are mentioned below: Chucks – Three jaw and four jaw chucks are mounted on shaper with suitable means to hold the work pieces. Special...
Continue reading »
November 21, 2014 admin
Shaping Machine
2 Comments
The following are the main parts of shaping machine: Base – Base is a hollow casting upon which the other parts of the shaper are mounted. It also houses a reservoir for supply of oil which is circulated for moving parts of the machine. Frame...
Continue reading »
November 21, 2014 admin
Shaping Machine
2 Comments
Crank Shaper – The most common type of shaping machine is the crank shaper, in which the motion of its ram is being derived from a crank, a crank block, and a crank pin. The shaper size is known by the largest stroke of the...
Continue reading »
November 21, 2014 admin
Shaping Machine
No Comment
The shaper is a reciprocating type of machine tool used to produce flat surface. The surface may be horizontal, vertical or inclined. Modern shaper can generate contoured surfaces also. This is accomplished by holding the work rigidly on the machine and a reciprocating single point...
Continue reading »
November 21, 2014 admin
Shaping Machine
No Comment
Description on Structural Detail and Operation The transmission is of direct mounted type and is bolted directly to the engine flywheel by a flexible disc drive. Provision is made to isolate the necessary drive gears from the flywheel cavity to provide a dry fly wheel housing while maintaining...
Continue reading »
November 20, 2014 admin
Tractor
No Comment
There are many types of tractors used in industries for various purposes. BEML tractor is mainly used for towing aircraft from hangers to the dispersal area. Bharat Earth Movers Ltd Bangalore manufactures this tractor. It has got 75 Ton towing capacity. Ashok Leyland engine and...
Continue reading »
November 20, 2014 admin
Tractor
No Comment
An accredited law school is a law school that has gotten accreditation from an outsider authorizing organization. In numerous spots, just people who have finished a law degree from a certify law school are qualified to sit for the law student review or to provide legal...
Continue reading »
November 19, 2014 admin
Accredited Distance Education, Accredited Law School, Accredited Online College
No Comment
An accredited separation learning degree is an authority accreditation issued by a school that offers a separation learning degree projects and that likewise is licensed. The degree serves as confirmation of the understudy’s tasteful finish of studies in a specific order. It may additionally be...
Continue reading »
November 19, 2014 admin
Accredited Distance Education, Accredited Online College
No Comment